Mining Drill Rigs

Blast Hole Drill Rig

BEAVER BCD-90 Model, Crawler Mounted Pneumatically Operated Blast Hole Drilling Rig can capable of drilling from 4.5” to 6” Dia. Bore Holes in hard rock formation by DTH method up to a depth of 30 Meters (100 Ft.) under favorable Drilling Conditions.The hydraulic Cylinders in this machine shall be powered by a separate hydraulic power pack. It is a very cost effective and best product for open cast mining applications.

Technical Specifications:

apacity of drilling:41/2” to 6” bore hole to a depth  of 100mtr. Under favorable  drilling conditions
Prime mover OS the hydraulic  Pumps used:Tractor Engine
Hydraulic Pumps used:Gear type/ Van Type
Maximum operating pressure:180 Kg/cm2
Hydraulic oil Tank Capacity:300 Ltrs
Mast:Suitable to handle 10ft. Rods
Mast Construction:Channel structure
Centralizer opening:203mm
Pull up Force:4700kg
Pull Down Force:2400kg
Pull up Speed:39Mts/ min
Rotation Speed:0 to 100rpm
Max. torque:240Kgmts
Hydraulic Jacks (Stabilizers):4 no. of 100*63*610mm stroke
Break Out wrench (to open the  drill joints):80mm*300mm Stroke
Water Injection Pump:36Lpm at 450psi

Excavator Mounted Drilling Rig

Approx Price: Rs 17 Lakh / Unit 
Minimum Order Quantity: 1 Unit
Drilling rig mounted on Tata Ex 200 excavetor sutable to handle drill rod of length 6mts. The compressor is mounted on board.

Under Ground Mining Drilling Rig

BEAVER UGD-200 Model, Crawler Mounted Hydraulically Operated Under Ground Mining Blast Hole Drilling Rig can capable of drilling from 4.5” to 6.5” Dia. Bore Holes in hard rock formation by DTH method up to a depth of 60 Meters (200 Ft.) under favorable Drilling Conditions.The hydraulic pumps shall be powered by either Electrical Motor or by a separate diesel drive deck engine. It is the best & unique product for the Under Ground Mining applications.

Technical Specification:

acity of Drilling:4.5” to 6” DTH Drilling to a depth of  60 mtrs. (200 feet)
Type of Drilling:DTH
Prime mover of the  hydraulic pumps:Electrical Engine / Diesel Deck  Engine
Hydraulic Pump used:Gear Type / Vane Pump
Maximum operating  pressure:220 Kg/cm2
Hydraulic oil tank capacity:250 Ltrs.
Mast Construction:Channel  Structure
Mast:Suitable to handle 4.5ft. / 5ft. pipes
Centralizer opening:270mm
Pull-up Force:8000kg
Pull-down Force:4500 Kgs
Pull-up Speed:32 Mtrs/min
Max. Torque:280 Kg-m
Rotation Speed:0-100 Rpm
Hydraulic Jacks (Stabilizers):4 Nos. of Ø100x63x610 Stroke
Break-out wrench (to open  the drill joints):Ø70x300 Stroke
Water Injection Pump:36 LPM @ 40 Bar

Tractor Mounted Blast Hole Drill Rig

Technical Specifications:

Capacity of drilling41/2” to 6” bore hole to a depth of 100mtr. Under favorable drilling conditions
Prime mover OS the hydraulic Pumps usedTractor Engine
Hydraulic Pumps usedGear type/ Van Type
Maximum operating pressure180 Kg/cm2
Hydraulic oil Tank Capacity300 Ltrs
MastSuitable to handle 10ft. Rods
Mast ConstructionChannel structure
Centralizer opening203mm
Pull up Force4700kg
Pull Down Force2400kg
Pull up Speed39Mts/ min
Rotation Speed0 to 100rpm
Max. torque240Kgmts
Hydraulic Jacks (Stabilizers)4 no. of 100*63*610mm stroke
Break Out wrench (to open the drill joints)80mm*300mm Stroke
Water Injection Pump36Lpm at 450psi
Looking for Mining Drill Rigs ?
© Beaver Engineering Corporation
 
Desktop Site Back to top